Home
Contact Us
Email
 
 khaldi@khaldifire.com
 013-8462047
   
 RELIEF VALVES - WALL TYPE  
 
Description   Technical Data

Working Pressure:
Valves unseat and swing open under unseating pressure to release the outfall fluid and close when pressure is relieved.
Accessories / Options:
4” & 6” F-1496-T Wall Pipe with Grate
Suggested Specifications:

  • The wall type hydrostatic pressure relief valve shall be suitable for sidewall installation in tanks and digesters.
  • The valve shall be of the 1.0 degree seat design with offset single pivoted hinge.
  • The flap gate and body will be cast iron conforming to ASTM specifications A-126 Class B.
  • The body seat ring and hinge pin shall be furnished of bronze.
  • The gate shall have a neoprene rubber seat cemented and mechanically retained in place by a retainer plate. The body seat ring shall be threaded and screwed into place and the face machined to a smooth finish.
  • The valve shall have a 4” or 6” flanged end faced and drilled to ANSI 125 pound template for connection to a 4” or 6” wall pipe.
  • Wall type pressure relief valves shall be furnished by Kennedy Valve or approved equal.
 
Copyrights © 2012 Fire Protection & Safety Solution All Rights Reserved . Designed By: SAUDI SOFTECH